Roma-Style Synthetic Resin Roofing
Roma 1050 ASA PVC Roof Tile
A curved Roma-style synthetic resin roofing tile with a published total width of 1050 mm, effective coverage width of 950 mm and thickness options from 2.3 to 3.0 mm. Designed for villas, galleries, gazebos, residential roofs and flat-to-slope renovation projects.
- 1050 mm total width
- 950 mm effective coverage
- 190 mm wave pitch
- Custom colors and lengths
Roma 1050 identifies a decorative ASA PVC roofing profile with a published total sheet width of 1050 mm. The profile drawing shows an effective roof coverage of 950 mm after the side overlap, a wave pitch of 190 mm and a profile height of 55 mm.
The product is intended for pitched roofs where a curved tile appearance is required. Final sheet length, end overlap, support spacing, fasteners and accessory quantities must be confirmed from the project drawing and the approved installation specification.
Profile and dimensions
Roma 1050 technical reference
Dimensions below are taken from the currently published Roma profile. Commercial and installation values should be reconfirmed before order approval.
| Parameter | Published reference | Order confirmation |
|---|---|---|
| Model | Roma PVC 1050 roof tile | Confirm final product code |
| Total width | 1050 mm | Use for transport and profile identification |
| Effective width | 950 mm | Use for preliminary roof coverage calculation |
| Wave pitch | 190 mm | Confirm accessory and overlap compatibility |
| Profile height | 55 mm | Confirm from approved drawing |
| Thickness options | 2.3 / 2.5 / 2.8 / 3.0 mm | Select by project and approved recommendation |
| Layer structure | Old page states both “4 layers” and “2–4 layers” | Confirm exact layer structure before production |
| Length | Custom / not clearly published | Coordinate with roof slope and loading limits |
| MOQ | Old page reference: 1000 m² per thickness | Reconfirm on the current quotation |
| Lead time | Old page reference: 10 working days after deposit | Reconfirm by quantity, color and schedule |
Product structure
Confirm the ASA PVC layer structure before ordering
The previous page contains inconsistent layer information. The diagram below shows the purchasing logic for a multi-layer ASA PVC tile, not an unverified factory formulation.
What the buyer should verify
Do not rely on “four layers” as a marketing label alone
Ask the supplier to identify each layer, the material used, the thickness-control method, the approved sample and the test report associated with the ordered grade.
- ASA surface material and grade
- Overall finished thickness
- Cross-section of the approved sample
- Color approval and batch tolerance
- Weathering test method
- Impact and fire test documents
- Profile dimension tolerance
- Batch traceability
Warranty and color-retention periods should only be published when supported by the current written warranty terms, product grade, installation conditions and valid test evidence.
Color options
Published Roma 1050 color references
The profile image shows the following color names. Availability and exact shade must be approved against a physical sample because monitor colors are not accurate production standards.
Selection benefits
Why projects select the Roma 1050 profile
These are product-selection considerations rather than unconditional performance guarantees. Final suitability depends on the ordered grade, support design and installation.
Decorative curved profile
The Roma wave produces a tile-like appearance for pitched roofs without installing individual clay tiles.
Defined effective coverage
The published 950 mm effective width supports preliminary quantity and roof-layout calculations.
Multiple thickness choices
Published 2.3–3.0 mm options allow the ordered model to be reviewed against project requirements.
Color selection
Several published colors support residential, resort and decorative architectural schemes.
Long-sheet installation
Longer roofing sheets may reduce the number of individual pieces compared with traditional roof tiles.
Accessory coordination
Ridge, hip, verge and flashing details can be reviewed with the roof drawing before quotation.
Applications
Typical Roma 1050 roof applications
The existing product page lists villas, lofts, galleries, gazebos and flat-to-slope renovation. Structural suitability must still be evaluated for each project.
Villas & Houses
A decorative curved roofing profile for pitched residential roofs.
Galleries & Corridors
Suitable for covered walkways and selected architectural roof sections.
Gazebos & Pavilions
A tile-style appearance for landscape and leisure structures.
Resorts & Hospitality
Multiple colors can support resort, hotel and leisure-project design themes.
Flat-to-Slope Renovation
Review the new support structure, drainage, loads and roof geometry before selection.
Public & Commercial Buildings
Can be evaluated for selected schools, community buildings and decorative commercial roofs.
Profile comparison
Roma 1050 vs Spanish PVC roof tile
Both belong under the ASA PVC roofing family, but they should remain separate pages because buyers compare different profile shapes, dimensions and architectural effects.
| Selection factor | Roma 1050 ASA PVC Tile | Spanish PVC Roof Tile |
|---|---|---|
| Profile appearance | Roma-style rounded repeating wave | Spanish or colonial curved tile course |
| Published width data | 1050 mm total / 950 mm effective | Published models include 1040 mm and 1050 mm total widths |
| Published profile geometry | 190 mm pitch / 55 mm height | Confirm from the selected Spanish model drawing |
| Typical applications | Villas, gazebos, galleries and renovation | Villas, residences, resorts and colonial-style projects |
| Best next page | This Roma 1050 product page | View Spanish PVC Roofing Profiles |
Installation planning
Confirm these details before installation
This product page is not a structural installation manual. Obtain the approved profile drawing, fastening method and project-specific support recommendation.
- Minimum roof pitch
- Purlin or batten spacing
- Side and end overlap
- Fastener and washer type
- Drilling-hole allowance
- Thermal expansion gap
- Ridge and verge details
- Walking and handling limits
Packing and shipment
Loading quantity depends on the final order
Container quantity changes with thickness, sheet length, nesting, accessories and packing method. Prepare the loading plan after the order list is confirmed.
- Sheet and bundle quantity
- Maximum selected length
- Surface and edge protection
- Ridge accessory packing
- Shipping marks
- 20GP or 40HQ loading plan
Order workflow
From profile confirmation to shipment
A complete order specification should connect the profile dimensions, roof layout, color approval, product grade, accessories and packing requirements.
Quality control
Roma 1050 inspection points
Define the test method and acceptance criteria before production instead of relying on general terms such as “high quality” or unsupported lifetime claims.
Profile dimensions
Verify total width, effective width, wave pitch, height and overlap geometry.
Finished thickness
Measure the selected 2.3, 2.5, 2.8 or 3.0 mm grade at agreed locations.
Layer structure
Compare the production cross-section with the approved sample and order specification.
Color consistency
Compare the batch with the approved physical sample under defined lighting.
Surface and edge quality
Inspect cracks, bubbles, scratches, deformation, damaged edges and profile distortion.
Accessory fit
Check ridge, flashing and edge components against the Roma 1050 profile.
Impact test
Use the agreed sample, conditioning and test method when impact evidence is required.
Fire documentation
Confirm the exact product grade and valid test report before stating a fire classification.
Packing inspection
Check quantity, bundle protection, labels, loading sequence and shipping documents.
Related roofing pages
Continue comparing the ASA PVC roofing range
These internal links connect the Roma model with its parent collections and adjacent product profiles.
Frequently asked questions
Roma 1050 purchasing questions
No. The published profile drawing shows 1050 mm as the total width and 950 mm as the effective coverage width after the side overlap.
The current drawing shows 1050 mm total width, 950 mm effective width, 190 mm wave pitch and 55 mm profile height.
The existing page publishes 2.3, 2.5, 2.8 and 3.0 mm options. Confirm the current availability and recommended grade on the quotation.
The old page is inconsistent: it states “4 layers” in one area and “2–4 layers” in another. Confirm the exact cross-section and layer materials for the ordered grade before production.
The published color image lists Light Red, Grey, Jujube Red, Ocean Blue, Dark Green, Blue Grey, Brick Red, Gold and Silver Grey. Approve the final shade using a physical sample.
The old page lists OEM/ODM supply but does not clearly publish the length rules. Send the roof slope dimensions and destination so the available length and loading limit can be confirmed.
The old page states 1000 m² per thickness. Reconfirm this on the current quotation because MOQ can change with thickness, color, production scheduling and packaging.
The old page states 10 working days after deposit. The current lead time should be reconfirmed according to quantity, color, raw-material availability and production schedule.
Matching accessories can be reviewed with the roof drawing. Include ridge length, hips, verges, wall junctions and accessory quantities in the RFQ.
Use the 950 mm effective width for preliminary coverage, then include slope length, end overlap, ridges, hips, valleys, cut areas and a project allowance.
Do not treat a general website statement as a warranty. Request the current written warranty terms, ordered grade, color, installation conditions and supporting weathering test evidence.
Provide the project country, building type, roof drawing, slope and eave dimensions, thickness, color, quantity, accessories, packaging requirements and destination port.
Request a Roma 1050 ASA PVC roof tile quotation
Send the roof drawing, thickness, color, required quantity, accessory list and destination port. The quotation should confirm profile dimensions, product structure, current MOQ, lead time and packing.