Solid polycarbonate sheet manufacturer
PC Solid Sheets for Glazing, Roofing & Fabrication
High-impact solid polycarbonate panels for protective glazing, machine guards, canopies, skylights and custom fabricated components—supplied to distributors, contractors and industrial buyers.
- Clear and coloured options
- UV-protected grades
- Cut-to-size and drawing review
Product Overview
What Is a PC Solid Sheet?
A PC solid sheet is an extruded polycarbonate panel with a continuous, non-hollow structure. It is selected where impact performance, visibility, forming or machining is more important than the low weight and insulation of multiwall sheet.
It is also commonly searched as solid polycarbonate sheet, clear polycarbonate panel, transparent PC board or impact-resistant plastic glazing. Exact performance depends on grade, thickness, dimensions, support system and operating conditions.
- Solid flat panel
- Clear or coloured
- Indoor or UV grade
- Custom cut sizes
- Drilling and routing
- Export protection
Product Options
Choose the Sheet by Function
Specify the surface, optical requirement and exposure conditions—not only the nominal thickness.
Clear Solid Sheet
Transparent panels where visibility and impact resistance are key selection factors.
GlazingGuardsUV-Protected Sheet
Outdoor-grade options with one- or two-side UV protection subject to the selected grade.
CanopiesRoofingTextured Sheet
Patterned surface options for privacy, decorative glazing and light diffusion.
PartitionsDiffusionFabricated Parts
Cut, routed, drilled or formed components reviewed from a dimensioned drawing.
OEMCustomSpecification Guide
PC Solid Sheet Specifications
Availability varies by grade and production run. Final data must come from the approved quotation, sample and grade-specific datasheet.
| Item | Options to discuss | Buyer confirmation |
|---|---|---|
| Material | Solid polycarbonate (PC) | Grade, origin and required documentation |
| Thickness | Thin to heavy-gauge sheet options by production capability | Nominal thickness and tolerance |
| Width & length | Standard sheets or cut-to-size panels | Finished sizes, cutting plan and quantity |
| Colour | Clear, opal, blue, green, bronze, grey or referenced colour | Approved sample and optical target |
| Surface | Smooth, textured, hard-coated or other option where available | Scratch, abrasion, privacy or appearance requirement |
| UV protection | Indoor, one-side UV or two-side UV options | Exposed side and outdoor service conditions |
| Fabrication | Cutting, drilling, routing, notches, bending or forming review | CAD/PDF drawing and tolerances |
| Packing | Protective film, edge protection, pallet or crate | Handling, labels and destination |
Engineering note: “Unbreakable” and “shatterproof” are common marketing terms but should not be treated as absolute performance guarantees. Suitability must be verified for the exact grade, thickness, panel size, supports, temperature and impact conditions.
Optical Selection
Define More Than “Clear”
Visual clarity, light transmission, haze, tint and surface quality can change by grade and thickness. For protective glazing, confirm both the viewing requirement and impact conditions. For privacy or diffusion, approve a physical sample under the actual lighting.
Applications
Common Uses for Solid Polycarbonate Panels
Machine Guards
Transparent equipment enclosures where visibility and defined impact protection are required.
Canopies & Skylights
Outdoor glazing after UV grade, support spacing, fixing and drainage are confirmed.
Protective Glazing
Interior or exterior panels selected around transparency, exposure and impact requirements.
Safety Barriers
Transparent screens and partitions for commercial or industrial environments.
Signs & Displays
Clear, tinted or printed panels requiring machining, forming or surface finishing.
Custom Components
Fabricated covers, windows and guards produced from buyer drawings and tolerances.
Material Comparison
Solid Polycarbonate vs Acrylic vs Hollow Sheet
| Factor | Solid polycarbonate | Acrylic sheet | Hollow polycarbonate |
|---|---|---|---|
| Construction | Continuous solid PC panel | Continuous solid PMMA panel | Ribs and hollow air chambers |
| Selection strength | Impact performance and fabrication flexibility | Optical appearance and surface qualities by grade | Low weight and thermal insulation |
| Typical visibility | High transparency with the correct clear grade | High clarity with the correct grade | Internal ribs remain visible |
| Typical use | Guards, glazing, barriers and fabricated parts | Displays, signs and selected glazing | Greenhouses, canopies and daylight roofs |
| Key check | Grade, thickness, impact, UV side and supports | Impact, temperature, solvent and outdoor exposure | Wall structure, sealing, span and UV side |
Custom Processing
Send a Drawing for Fabrication Review
Cutting
Rectangular panels and profile-cut parts reviewed against dimensions and edge quality.
Drilling & Routing
Holes, slots, openings and notches produced from approved drawings.
Forming Review
Bending or thermoforming assessed against grade, thickness and geometry.
Protection & Packing
Film, interleaving, edge protection, labels and export packing coordinated.
RFQ Checklist
Request a PC solid sheet quotation
Provide enough information to match the correct grade, size, surface and fabrication process.
Please include
- Application
- Indoor/outdoor use
- Thickness
- Width and length
- Colour
- Surface finish
- UV side
- Fabrication drawing
- Tolerances
- Quantity
- Required documents
- Destination port
Related Products
Explore More Polycarbonate Sheets
Polycarbonate Sheets
Compare the complete solid, hollow, corrugated and textured sheet range.
View the product range →PC Hollow Sun Sheets
Explore lightweight twin-wall and multiwall panels for daylight roofing.
View hollow sheets →Textured Polycarbonate Sheet
Review patterned panels for privacy, diffusion and decorative glazing.
View textured sheets →Frequently Asked Questions